Course Location Directions

(in alphabetical order)

FAIRCHILD SEMICONDUCTOR - South Portland :

From exit 45 on the Maine Turnpike turn right down the Maine Mall Rd. At the 3rd set of lights, just past the Maine Mall, at Tim Horton's, turn left on Running Hill Rd. The Fairchild entrance is just after you go over the turnpike, on your left. Park anywhere, enter the front building entrance and see the security personnel there.

GATES FORMED-FIBRE - Auburn :

From exit 75 on the Maine turnpike take a left on to route 202. Go 200-300 yds and turn right onto Allied Road just before the “Welcome to Auburn” sign. Take another right at the Gates sign which is just over the railroad tracks. Go to the front of the parking lot and park in the visitor parking section. Walk to the front middle of the building (lobby). Enter the right side of the offices by entering the door to the right in the lobby. Walk down the office walkway and enter the third door to the left. This will be marked the “Production Conference room”. This is where the classes will be held. 

Huhtamaki Foodservice, Waterville:

242 College Avenue
Waterville, ME 04903
 From I-95 take exit 130 (formerly exit 34). Turn right onto Main Street/ME-104 for about 0.1 miles. Turn left onto Armory Road for 0.5 miles. Armory Road becomes Hazelwood Avenue for 0.2 miles. Turn left onto College Avenue/ME-201 for 0.8 miles.

L.L. BEAN - Brunswick location :

To L.L.Bean Manufacturing in Brunswick from Freeport
Follow Route 295 North (which becomes I-95 in Falmouth) to Exit 22/Brunswick. The Exit 22 off-ramp becomes Pleasant Street. At the first traffic light (Dunkin Donuts on your right), turn onto Church Road. Approximately 1/2 mile down Church Road you will turn right at the blue Brunswick Industrial Park Sign. L.L.Bean Manufacturing is the third building on your right. Visitor parking is in front of the building.

To L.L.Bean Manufacturing in Brunswick from Lewiston
Follow Route196 to Topsham. Just as you're entering Topsham, take a right onto 295 South (before you get to the Topsham Fair Mall). Take the first exit (Bath/Brunswick, Exit 22). Follow Rte. 1 north (Pleasant Street) toward downtown Brunswick. At the first traffic light (Dunkin Donuts on your right), turn onto Church Road. Approximately 1/2 mile down Church Road you will turn right at the blue Brunswick Industrial Park Sign. L.L.Bean Manufacturing is the third building on your right. Visitor parking is in front of the building.

Maine Machine Products

North on Maine Tpke/495
Take Exit 63 - Gray, ME
Turn right after you exit the tpke. Take left at first traffic light. Take left at second traffic light following Route 26 North. Stay on Route 26 North for approx. 25 miles. You will be heading towards Poland Spring, Oxford, Norway, South Paris.
When you get to the set of lights with Oxford Hills Comprehensive High School (OHCHS) on your right and Dead River gas station on your left, turn right (still Route 26). Continue on Route 26 North (also Main Street, South Paris) for approx. 2 miles. At the end of town bear left around island and then approx. 100 yards bear left on to High Street. Moore Park will be on your right. Follow High Street for one mile (keep the Corner Store on your left), then turn left on to Prospect Avenue. Maine Machine Products Company will be on your left.

South on 95 to ME Tpke/495 South
Take Exit 80 - Lewiston, ME
Follow Route 121 west towards Mechanic Falls/Oxford. Take right on Route 26 North and follow directions above.

If you need further information please call us at (207)743-6344

Poland Spring Bottling Company Conference Center :

From Portland area: North on Maine Turnpike to Exit 63, Gray Route 26. North on Route 26 past Route 122. One mile past Route 122 look for the Poland Spring Inn ion the right (at the top of the hill). Turn right into the Inn's driveway. Go up the hill, turn right onto Preservation Way and go through the gates. Go past the State Building on the left and the Chapel on the right. Go through the second set of gates. Follow the road around to the parking lot and Conference Center (large rectangular building). The Conference Center is where the classes will be held.
From Lewiston/Auburn area: Follow Hotel Road (Route 122) to Route 26. At the intersection of 122 and 26, turn right onto Route 26. One mile after turning onto Route 26 look for the Poland Spring Inn sign on the right (at the top of the hill). Turn right into the Inn's driveway. Go up the hill, turn right onto Preservation Way and go through the gates. Go past the State Building on the left and the Chapel on the right. Go through the second set of gates. Follow the road around to the parking lot and the Conference Center (large rectangular building). The Conference Center is where the classes will be held.

Remstar Int'l :

41 Eisenhower Dr
Westbrook, ME

From 95 North or South

Take Exit 46 toward ME-22/Jetport/ME-9/Congress St
Turn Left onto Jetport Rd
Turn Left onto Congress St/ME-22. Continue to follow ME-22
Turn Right onto Spring St
Turn Left onto Eisenhower Dr
End at 41 Eisenhower Dr, on your right

From the North on 295
Going south on I-295, take exit 5B, ME-22W/Congress St
Turn slight right onto Congress St/ ME-22. Continue to follow ME-22
Turn Right onto Spring St
Turn Left onto Eisenhower Dr
End at 41 Eisenhower Dr, on your right

Rich Technology International:

28 Pond View Drive, Scarborough
From the Maine Turnpike (I-95), take the exit- exit number 45- toward I-295/MAINE MALL RD./ME-114/PAYNE RD./US-1. Merge onto MAINE TURNPIKE AUTHORITY APPROACH RD. Turn RIGHT onto MAIN ST/US-1/ME-9. Continue to follow US-1/ME-9. Turn LEFT onto PLEASANT HILL RD. Turn LEFT onto POND VIEW DR. End at 28 Pond View Dr Scarborough ME

Sappi – Greep House, Westbrook :

From I-95 North or South take exit 48,
Go straight off the exit through the first stop light onto Larabee Road.
At the second stop light (McDonalds on the right) turn right onto Main Street.
Stay straight on Main Street; this becomes one way; stay straight past the fire department onto Cumberland Ave. The mill will be on your right.
Continue across the river. Immediately past the mill is a Victorian house on a small hill on the right. This is the Greep House where the training will be held. Turn right into the drive and park in the lot at the side of the house. Enter through the front door.

Sappi Gatehouse Conference Room - Westbrook:

From I-95 North or South take exit 48,
Go straight off the exit through the first stop light onto Larabee Road.
At the second stop light (McDonalds on the right) turn right onto Main Street.
Stay straight on Main Street; this becomes one way; stay straight past the fire department onto Cumberland Ave. The mill will be on your right.
Cross over the river and turn into the small parking lot on the right just after the river with the wrought iron fence.
Enter through the glass doors, go straight down the hall to the end, then up a flight of stairs to the left. The conference room will be on the left.

York Manufacturing:

43 Community Drive, Sanford
From I-95 Take the ME-35 exit- EXIT 25- toward KENNEBUNK/KENNEBUNKPORT. Turn LEFT onto ME-35/ALEWIVE RD.  Turn RIGHT onto ALFRED RD. 0.8 miles Turn LEFT onto MILL ST. 0.6 miles Turn RIGHT to stay on MILL ST. <0.1 miles Turn RIGHT onto WEBBER HILL RD/ME-99. Continue to follow ME-99. 5.8 miles. Turn RIGHT onto SMADA DR. 0.1 miles Turn RIGHT onto COMMUNITY DR (Portions unpaved). 0.4 miles End at 43 Community Dr, Sanford, ME 04073-5809